steve10765
Daemon Poster
- Messages
- 645
- Location
- USA
I have a new FX 8320 and an Gigabyte 970-UD3P mobo and for the love of me I can't get the VCORE to change, no matter what I do, I disabled cool n quite, turbo boost, C1(or something similar) instructions, and APM mode. - these are all power saving stuff.
When I put in 1.4V it doesnt change, and any other value has no affect. It boots to windows but when I open Coretemp and CPUz it hasnt changed. Any ideas what I should do with the vcore? Others with gigabyte boards have had this problem too. A weird thing that happens when I have all the power saving stuff enabled is the CPU sits at 3.7GHZ at 1.412V but then when it turbos to 4.5GHZ it drops down to 1.387, but if 1 core drops down to 3.7GHZ the vcore shoots up to 1.412 vcore again.
it sits at 1.412 vcore stock for some reason.None of this makes sense, lower volts at higher clocks
Hey guys... I am on the stock cooler with a 120mm fan zip tied to it with arctic silver mx4, its in the lower 50-53C and its pretty silent. When I put the case fans on turbo instead of silent its drops to 43-47C. I also have my MSI 270X at 1200MHZ core and 1450MHZ memory +20% power. It gets up to 80C though with my case fans on silent, with case fans on turbo it drops 5c, and the GPU fan never goes above 23%, the min is 20%. Also core 3 of my CPU had an error and stopped after 2 hours of prime, the rest where fine for the night.
So how do I change volts??? any tips? I also cant enable windows aero scheme, I have to manually enable it in the services.msc, and then it crashes soon after, and I can't do windows experience thing, which is something I think aero needs. I care about this more than the voltage because everything looks bad without aero.
When I put in 1.4V it doesnt change, and any other value has no affect. It boots to windows but when I open Coretemp and CPUz it hasnt changed. Any ideas what I should do with the vcore? Others with gigabyte boards have had this problem too. A weird thing that happens when I have all the power saving stuff enabled is the CPU sits at 3.7GHZ at 1.412V but then when it turbos to 4.5GHZ it drops down to 1.387, but if 1 core drops down to 3.7GHZ the vcore shoots up to 1.412 vcore again.
it sits at 1.412 vcore stock for some reason.None of this makes sense, lower volts at higher clocks
Hey guys... I am on the stock cooler with a 120mm fan zip tied to it with arctic silver mx4, its in the lower 50-53C and its pretty silent. When I put the case fans on turbo instead of silent its drops to 43-47C. I also have my MSI 270X at 1200MHZ core and 1450MHZ memory +20% power. It gets up to 80C though with my case fans on silent, with case fans on turbo it drops 5c, and the GPU fan never goes above 23%, the min is 20%. Also core 3 of my CPU had an error and stopped after 2 hours of prime, the rest where fine for the night.
So how do I change volts??? any tips? I also cant enable windows aero scheme, I have to manually enable it in the services.msc, and then it crashes soon after, and I can't do windows experience thing, which is something I think aero needs. I care about this more than the voltage because everything looks bad without aero.
Last edited: