ikonix360

Oh ok so the tubes should be facing the RAM, right? I can do that this afternoon when I get home. I suppose it has to do with either...

Here's the PC So far it's running great.

Ok I'll have to give that a try. Prob just do the three on the card and the fourth on the built in graphics. Fairly sure three...

Oh the built in graphics can run with the PCI-E card? Did not know it was possible as all PCs I've had wouldn't do it. However the...

Indeed it does, but should be fine.

That card looks like it has a 12 pin connector. Motherboard has been sent back. I did order the kit to mount the card vertically as...

The heatsink came off easy enough so I used M2_1. Using a very tiny flat headed jewler's screwdriver and a microscope I was able to get...

Looks like if I use the M2_2 socket the PCIE1 will be 8X only so i must use the M2_1 socket for the SSD.

If I cannot straighten the pins I'll send it back. Was hoping I had a molex to 4 pin fan adapter so I could power the fans to see how...

Got that fixed. Got a new problem. How do i fix? I got a microscope at work and some small tweezers and jewelers screwdrivers and...

And we have a problem. The radiator fits fine, but the screws are not long enough so the fans can mount with the RGB rings so the light...

The cable modem/router is about 10' from the TV. Wired for the new building is better as I plan on gaming and streaming.

I'll for sure keep the one in the front as cleaning dust from a filter is easier than cleaning dust from a radiator

I'll leave it for looks. Otherwise it would have to be put somewhere and most likely would get lost.

Oh ok. Looks like the fans on the radiator in the pictures on Amazon are pushing air through the radiator, but that can be changed I...