coltonwmcc
Beta member
- Messages
- 1
- Location
- United States
Hey everyone, so I am trying to build my new pc setup. I had a plan, 1 - 24" monitor and 3- 19.5" monitors, however I went to best buy today and found a deal on a 27" monitor that I couldn't pass up. Well now this threw off my entire plan and need help now.
So I want the 27" monitor in the middle as my main. Now I want 2 - 19.5" monitors vertical on the left and right side of the 27" and then finally I want the 24" monitor above the 27 inch angled down. So here is my dilemma, I can't attach monitors to the wall so I have to work with monitor stands. The two side vertical monitors on the sides aren't a problem. Those can both be a single stand apiece and holding where I want them. The problem lies with trying to get the 24 inch monitor over the 27 inch monitor. Any recommendations on mounts that aren't going to break the bank for this? The 27 inch monitor doesn't have any way to mount, only works with the stand it comes with so that has to sit on its own stand on the desk.
I was looking at this mount,
https://www.walmart.com/ip/VIvo-Qua...Adjustable-4-Screen-Desk-Mount-Stand/42469759
Have the 27" sit in the middle and not use the center and attach the other 3 to their respective areas but not sure. Or if there was a single or a double mount that would be tall enough to go over the 27" and be able to still tilt down about 15 degrees for me sitting at my desk.
The double mount being this one,
https://www.walmart.com/ip/147249646#about-item
Sorry for the post being so long, just want to get this right the first time without a lot of trial and errors and having to keep buying things and sending them back as this is a little more specialized and can't just pick up at a store and I am wanting my first PC build and setup to be free of any hassles in just trying to setup monitors.
Thank you for any feedback,
Colton
So I want the 27" monitor in the middle as my main. Now I want 2 - 19.5" monitors vertical on the left and right side of the 27" and then finally I want the 24" monitor above the 27 inch angled down. So here is my dilemma, I can't attach monitors to the wall so I have to work with monitor stands. The two side vertical monitors on the sides aren't a problem. Those can both be a single stand apiece and holding where I want them. The problem lies with trying to get the 24 inch monitor over the 27 inch monitor. Any recommendations on mounts that aren't going to break the bank for this? The 27 inch monitor doesn't have any way to mount, only works with the stand it comes with so that has to sit on its own stand on the desk.
I was looking at this mount,
https://www.walmart.com/ip/VIvo-Qua...Adjustable-4-Screen-Desk-Mount-Stand/42469759
Have the 27" sit in the middle and not use the center and attach the other 3 to their respective areas but not sure. Or if there was a single or a double mount that would be tall enough to go over the 27" and be able to still tilt down about 15 degrees for me sitting at my desk.
The double mount being this one,
https://www.walmart.com/ip/147249646#about-item
Sorry for the post being so long, just want to get this right the first time without a lot of trial and errors and having to keep buying things and sending them back as this is a little more specialized and can't just pick up at a store and I am wanting my first PC build and setup to be free of any hassles in just trying to setup monitors.
Thank you for any feedback,
Colton
