PS1 backups with my CD burner

Status
Not open for further replies.

ploder

Beta member
Messages
1
It's been a long time since I've made backups of my PS1 games for use on my modded console and I'm pretty sure I used my CD burner to backup Suikoden II in the past. However, I can't remember which software I was using or which write method.

My CD burner supports burning at x1-x4 but can't burn with RAW DAO (only DAO, RAW SAO, RAW SAO+SUB and TAO) According to my research I shouldn't have been able to make successful backups without RAW DAO. :confused:

My questions are therefore:

1. Would it be technically possible to burn a backup PS1 game using my CD burner?
2. If so which write method should I be using?
3. Which software should I be using?
4. Will any of the above change if I am burning protected PS1 games?
5. Is there anything else I should watch out for burning my PS1 games with this burner?

Here is a system info report from Alcohol 120% on my CD burner:

Code:
///////////////////////////////////////////////////////////////////////
   [b](F) YAMAHA CRW4416S(2:4) detail information.[/b]
///////////////////////////////////////////////////////////////////////
    Vendor Identification: YAMAHA
    Product Identification: CRW4416S
    Production Revision Level: 1.0j
    Location: Port 2, Bus 0, Target 4, Lun 0
    [b]Support recording method: DAO, RAW SAO, RAW SAO+SUB, TAO[/b]
    BURN-Free Technology: Not Supported
    Auto-Select best write speed: Not Supported
  -* Note: This information below is provided by the unit, it might be inaccurate. *-
  -* This software does not use this information!                                  *-
      Removable media: Yes
      Version: ANSI X3.131:1994 (SCSI-2)
      Response Data Format: 02h
      CD-R Read/Write: Yes/Yes
      CD-RW Read/Write: Yes/Yes
      Read CD-R Fixed Packet: Yes
      Test Write: Yes
      DVD-ROM Read: No
      DVD-R Read/Write: No/No
      DVD-RAM Read/Write: No/No
      Audio Play: Yes
      Composite Audio and Video Data Stream: No
      Digital output (IEC958) on port 1 Supported: No
      Digital output (IEC958) on port 2 Supported: No
      Mode 1 Form 2: Yes
      Mode 2 Form 2: Yes
      Multi-Session: Yes
      BUF: No
      CD-DA Commands supported: Yes
      CD-DA Stream is Accurate: Yes
      R-W Supported: Yes
      R-W De-interleaved and Corrected: Yes
      C2 Pointers Support: No
      ISRC Supported: Yes
      UPC Supported: Yes
      Read Bar Code: No
      Lock media into the drive: Yes
      Currently drive Lock state: Unlocked
      Prevent Jumper: No
      Eject Command: Yes
      Separate volume levels: Yes
      Separate channel mute: Yes
      Changer Supports Disc Present: No
      Software slot selection: No
      Side change capable: No
      P through W in Lead-In: No
A screen cap of the image burning wizard options in Alcohol


In addition these are the burning options that CloneCD provides for my drive:
 
http://www.techist.com/forums/f18/tech-forums-stance-emulators-any-system-181160/

We do not offer support for Modded systems that bypass measures put in place by a company to prevent piracy. Even though you want to backup your own games there is no way we can confirm that they are your games and not a game that has been downloaded we take the stance on caution.

Sorry for the inconvenience with this matter. But there are plenty of places out there that are more than willing to help. Unfortunately we are not one of them.
 
Status
Not open for further replies.
Back
Top Bottom