LOTS OF BLuE SCREEN ERRORS!!!!

bmoorhouse30588

Beta member
Messages
4
Hi,
I am having lots of problems with Blue Screen Errors, mainly when shutting down, but also when it's just on.
I have taken note of the error codes, and some seem pretty similar,
The Error Codes are:

0x00000001(0x00000384,0x00000002,0x00000001,0xF88E07F3)
0x000000C2(0x00000007,0x00000CD4,0x00000000,0x82D33DA8)
0x00000062(0x00000007,0x00000CD4,0x00000001,0x82B6BCEO)

I also got one whilst browsing the internet,
0x000000D1(0x00000384,0x00000002,0x00000001,0xF88E87F3)
ANY help with ANY of these errors would be appreciated.
Thank you,
--
Bryn Moorhouse
 

Legodude522

Daemon Poster
Messages
1,308
Location
Texas
BSoD's are commonly associated with memory issues. You should run memtest as foothead recommended.

For quick and dirty troubleshooting, odd are you have more than one stick of memory. Take one out, see if it works fine. Then switch it for the other one.
 

bmoorhouse30588

Beta member
Messages
4
Hi thanks for the speedy reply.
How long do you leave your computer on at one time, and what are its specs and OS?
My Computer is a Dell Dimension 3100 (512mb Ram 2x 70ishGB hdds), running XP Home. I leave my computer pretty much randomly, kinda ranging from 5 minutes, to all day.
The first thing to do is run a memtest.

www.memtest86.com/

Let it run overnight, and post back with the results. If it passes, then we can move on to other methods of diagnosing.
I let it run for 23 hours, didn't fail a single test as far as I can see.
BSoD's are commonly associated with memory issues. You should run memtest as foothead recommended.

For quick and dirty troubleshooting, odd are you have more than one stick of memory. Take one out, see if it works fine. Then switch it for the other one.
I will get round to this at some point, but I'm really busy atm so it amy be a while. Will re-post when done.

Thanks once again,
Bryn
 

Atomic Rooster

Omnipotent One
Messages
11,161
Location
USA
From the looks of it, you are having quite a few driver and/or hardware issues. The majority of those errors are driver related. Have you installed any new programs, hardware, update a driver, install an update, etc.? If so, there's a very good chance that the change you made is causing the stop errors.
 
Top