Ok, here is the BSOD code: STOP: 0x00000124. Did you need all the numbers in parenthesis?
According to the i7 overclocking guide, it looks like I need to raise the CPU VTT voltage. Or could it be something else?
Does it make a difference what multiplier I am using? Right now I have the cpu multiplier set at 20. I read somewhere, can't remember where that it is better to use odd numbers.
According to CPU-z, the vcore is only running at 1.32 when I have it set to 1.36 in the bios. I assume this has something to do with vdroop. In my bios, I have three options for vdroop, standard(disables LLC and follows intel spec), level 1(enables LLC and slightly adjust vdroop) and level 2(enables LLC and moderately adjusts vdroop).
LLC=load line calibration