Alright I'm looking to purchase a new graphics card: Nvidia Geforce 220 1024MB DDR2 Galaxy 22TGE8HX2IUN GeForce GT 220 Video Card - 1024MB DDR2, PCI-Express 2.0, DVI, HDMI, VGA at TigerDirect.com
and a power supply to go along with it: Newegg.com - LOGISYS Computer PS480D2 480W ATX12V Power Supply
I was posting to make sure that it would work and connect correctly with my current PC setup.
Processor:
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E2200
Codename Conroe
Specification Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.F.D
Extended CPUID 6.F
Core Stepping M0
Technology 65 nm
Core Speed 1198.5 MHz
Multiplier x FSB 6.0 x 199.7 MHz
Rated Bus speed 799.0 MHz
Stock frequency 2200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 11.0x
Max VID 1.325 V
Chipset:
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 399.5 MHz (1:2)
CAS# latency (CL) 6.0
RAS# to CAS# delay (tRCD) 6
RAS# Precharge (tRP) 6
Cycle Time (tRAS) 18
Row Refresh Cycle Time (tRFC) 42
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
If this info is irrelevant just tell me and I'll post the correct info. Thanks!
and a power supply to go along with it: Newegg.com - LOGISYS Computer PS480D2 480W ATX12V Power Supply
I was posting to make sure that it would work and connect correctly with my current PC setup.
Processor:
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E2200
Codename Conroe
Specification Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.F.D
Extended CPUID 6.F
Core Stepping M0
Technology 65 nm
Core Speed 1198.5 MHz
Multiplier x FSB 6.0 x 199.7 MHz
Rated Bus speed 799.0 MHz
Stock frequency 2200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 11.0x
Max VID 1.325 V
Chipset:
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 399.5 MHz (1:2)
CAS# latency (CL) 6.0
RAS# to CAS# delay (tRCD) 6
RAS# Precharge (tRP) 6
Cycle Time (tRAS) 18
Row Refresh Cycle Time (tRFC) 42
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096
If this info is irrelevant just tell me and I'll post the correct info. Thanks!