C:\WINDOWS\IFSLP.SYS & C:\DBLBUFF.SYS
Hi on my Hp Pavilion way back on 11-14-05 I wanted to set it back to the factory settings using the 1-3 hp system recovery discs that came with the system now im trying to get it going again when I go to boot up I have the 6 boot up choices with a time remaining limit of 30 seconds to enter a choice
With a warning below that : Windows has detected a registry/configuration error.
Use SCANREG to correct this error.
This driver is provided by Oak Technology, Inc.. OTI-P1X ATAPI CD-ROM device driver, Rev D91XV352
(C)COPYRIGHT OAK TECHNOLOGY INC. 1987-1997
Device Name : IDECD000
Transfer Mode : Programed I/O
Number of drives :1
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Bad command or file name
C:\WINDOWS\TEMP>
If I press shift and f5 at boot it says
Now preparing to start your new computer...
Windows is bypassing your startup files.
The following file is missing or corrupted:
C:\WINDOWS\DBLBUFF.SYS
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Microsoft(R) windows Millennium
(C)copyright Microsoft Corp 1981-1999
C:\>
also when I run 1.Normal
I get
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Bad command or file name
Cannot find WIN.COM, unable to continue loading Windows
C:\WINDOWS\TEMP
I have downloaded windows XP SP3 DISC
& also Windows Millenium Edition and extracted all files and put them on cdr's
im stuck here wanted to see ifI could get some help here
Thanks
Hi on my Hp Pavilion way back on 11-14-05 I wanted to set it back to the factory settings using the 1-3 hp system recovery discs that came with the system now im trying to get it going again when I go to boot up I have the 6 boot up choices with a time remaining limit of 30 seconds to enter a choice
With a warning below that : Windows has detected a registry/configuration error.
Use SCANREG to correct this error.
This driver is provided by Oak Technology, Inc.. OTI-P1X ATAPI CD-ROM device driver, Rev D91XV352
(C)COPYRIGHT OAK TECHNOLOGY INC. 1987-1997
Device Name : IDECD000
Transfer Mode : Programed I/O
Number of drives :1
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Bad command or file name
C:\WINDOWS\TEMP>
If I press shift and f5 at boot it says
Now preparing to start your new computer...
Windows is bypassing your startup files.
The following file is missing or corrupted:
C:\WINDOWS\DBLBUFF.SYS
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Microsoft(R) windows Millennium
(C)copyright Microsoft Corp 1981-1999
C:\>
also when I run 1.Normal
I get
The following file is missing or corrupted:
C:\WINDOWS\IFSHLP.SYS
Bad command or file name
Cannot find WIN.COM, unable to continue loading Windows
C:\WINDOWS\TEMP
I have downloaded windows XP SP3 DISC
& also Windows Millenium Edition and extracted all files and put them on cdr's
im stuck here wanted to see ifI could get some help here
Thanks