Nubius
Golden Master
- Messages
- 11,599
the links failed to connect because I copied and pasted it...normally those dots you see in there (at the end where it say .....name.jpg) shouldn't be there, and when you click on it in the actual Xtremesystems forums those won't be there and the links would work.
Here:
http://www.cox-internet.com/weapon/images/302MountSide3.jpg
http://www.cox-internet.com/weapon/images/shroudfuncutout2.1.jpg
http://www.cox-internet.com/weapon/images/shrdcoreblumet.jpg
http://www.cox-internet.com/weapon/images/rev2.1shrdfinal.jpg
First one I ever put together was the bigwater...it sucked....then I went to dangerden and have had to take this one apart on a few seperate occasions.....all it is is putting everything where you want it, then connecting it with the tubing.....it's impossible to make a jigsaw puzzle out of it honestly.
Doesn't take very long to set up...anywhere from 30mins to an hour depending on if you've done it before, how carefully you work etc...etc....I forget how long it took me because last time I did it, I was doing a bunch of other things in my case as well, but assuming you have the pump and heatercore mounted, and your water blocks installed it doesn't take very long to simply cut the tubing the right length and slide it on a barb and clamp it down.
Here:
http://www.cox-internet.com/weapon/images/302MountSide3.jpg
http://www.cox-internet.com/weapon/images/shroudfuncutout2.1.jpg
http://www.cox-internet.com/weapon/images/shrdcoreblumet.jpg
http://www.cox-internet.com/weapon/images/rev2.1shrdfinal.jpg
First one I ever put together was the bigwater...it sucked....then I went to dangerden and have had to take this one apart on a few seperate occasions.....all it is is putting everything where you want it, then connecting it with the tubing.....it's impossible to make a jigsaw puzzle out of it honestly.
Doesn't take very long to set up...anywhere from 30mins to an hour depending on if you've done it before, how carefully you work etc...etc....I forget how long it took me because last time I did it, I was doing a bunch of other things in my case as well, but assuming you have the pump and heatercore mounted, and your water blocks installed it doesn't take very long to simply cut the tubing the right length and slide it on a barb and clamp it down.