So set it close to it.... Itsd not rocket science... just over-clocking.
The very slight bounce is fine, 0.05v is little, now 0.50v is big.
Alright, I can live with that.
But I can't live with failing IntelburnTest on default settings and having my temps hit 66c with only a +.1v increase at full load. I just don't know what my next step is.
I should have all the hardware to do it right.
Q9550 with a low VID
Biostar I45
G.Skill PI black 2x2gb
Sunbeam Core contact freezer
Antec 900 with extra fans and TONS of air flow
So frustrating.