I have an old PIII 450mhz slot 1 system that has the option for a socket 370 cpu. I check the motherboard specs and it supports a 600mhz socket 370 cpu with a 66mhz FSB. When I bought the system it came with the slot1 450 and it runs ok. I bought a 600 mhz socket 370 cpu and I installed it. I changed the jumpers so its configured for a socket 370 and powered up the system. The system boots up but there is no display on the monitor and the monitor is on and plugged in. I powered it off and clear the CMOS and rebooted and got the same thing. I then reinstalled the slot 1 and it works fine. The FSB of the slot1 is 100mhz and I got pc-100 RAM and the socket 370 has a FSB of 66mhz. Will pc100 RAM run at 66mhz i thought it would? Has anyone had a similar problem and know what i can do to fix it? Thanks
shaun
shaun