Hi!
I'd like to receive some assistance in regards to memory and how it works. I currently have a setup of a triple channel memory of 12gb of RAM using the Corsair's 4GBs (times three).
I had originally been able to work up to 18 gb of ram (6 sticks | 3 x 2GB | 3 x 4GB). The direct cause of this 18gb not working is when the desktop started shifting during a plane flight has caused a few cables to be unplugged but - from the looks of it - no hardware seems to have any permanent damage.
The problem is that whenever I plug in all six sticks only 6gb is recognized.
It's in this order:
2GB STICK
4GB CORSAIR
2GB STICK
4GB CORSAIR
2GB STICK
4GB CORSAIR
I was wondering if there was any settings I should do in the BIOS?
For example, if I remove the ORANGE sticks, the 12GB is recognized.
This is
-empty-
4GB CORSAIR
-empty-
4GB CORSAIR
-empty-
4GB CORSAIR
-empty-
Kindly let me know how I should proceed. Thanks!
I'd like to receive some assistance in regards to memory and how it works. I currently have a setup of a triple channel memory of 12gb of RAM using the Corsair's 4GBs (times three).
I had originally been able to work up to 18 gb of ram (6 sticks | 3 x 2GB | 3 x 4GB). The direct cause of this 18gb not working is when the desktop started shifting during a plane flight has caused a few cables to be unplugged but - from the looks of it - no hardware seems to have any permanent damage.
The problem is that whenever I plug in all six sticks only 6gb is recognized.
It's in this order:
2GB STICK
4GB CORSAIR
2GB STICK
4GB CORSAIR
2GB STICK
4GB CORSAIR
I was wondering if there was any settings I should do in the BIOS?
For example, if I remove the ORANGE sticks, the 12GB is recognized.
This is
-empty-
4GB CORSAIR
-empty-
4GB CORSAIR
-empty-
4GB CORSAIR
-empty-
Kindly let me know how I should proceed. Thanks!
Last edited: