Hello all. So I setup a Panasonic BL-C131A security camera at my brothers house. After setting it up, I had assigned the camera port# 8085 and static ip address of 192.168.1.115. After setting the camera up, I went into the router to forward port 8085 to its static IP address. When I tried to access it remote by his external IP address, it doesn't connect. I tried setting it up with a DynDNS address, and however, that failed as well. Router is a netgear wndrmacv2. The ISP also has a firewall installed (BEC 7800TN R2 - Dual WAN ADSL2+ Firewall Router), but I logged into the device IP webpage and didnt notice anything. I went to the website Open Port Check Tool and checked to see if port 8085 was open but got a "cannot connect to host". I then tried to put the camera's port on 80, but still had no luck accessing it externally. Any thoughts??
Last edited: