router configuration for 2 networks and a ftp server.

[monsnet]

Hello network geeks,

I have a router with wan IP address 92.54.178.x
With lan IP 46.34.30.Y/29 (one is used by telephone system)
Subnet 255.255.255.248
PDNS 135.196.0.x
SDNS 135.196.0.y
I m using a Linksys router.
I do not have installed any server except a ftp server.

I need to setup my router so that I can have 2 DHCP networks for my place and my ftp server can be accessed by outside world (securely) and from my 2 local networks.

Thanks for your reply.

 

[office politics]

you will want to have a separate router (and dhcp) for the second network. you could build a linux box for this. two dhcp servers on the same subnet will cause problems.

if you can only use one router, then dhcp reservations are needed. i would think that linksys soho routers would not be able to support this.