For some reason, ever since i have rebuilt my pc into a new case, my dvd rom/ rw drives dont work. they are getting the power ok but my mb says they are not detected. i have changed ide cables but still no joy. i have double checked the jumper settings, 1 master and 1 slave but still no joy. in the device manager, the primary ide channel and the seconary ide channel says they are both working properly, but are not detected. i have checked the connections over and over again but still no joy. i have looked at the mb and all the pins seem to be fine, and every time i handle it, i use an anti static wrist band. so now im running out of ideas and begrudge paying for some bloke to come out and tell me what i already know. if anyone could help me with this i would apreciate the time. thank you.
by the way, here are my specs if needed:
cpu-pentium 4 3.0ghz
mb- elite group ECS 915X-A V1.0
hd-Maxtor 7Y250M0 250 GB
gc-NVIDIA GeForce 6600
and my dvd rom is a sony model no. ddu1613
and my dvd rw is an nec dl -+
thank you.
by the way, here are my specs if needed:
cpu-pentium 4 3.0ghz
mb- elite group ECS 915X-A V1.0
hd-Maxtor 7Y250M0 250 GB
gc-NVIDIA GeForce 6600
and my dvd rom is a sony model no. ddu1613
and my dvd rw is an nec dl -+
thank you.