WallyGator
Solid State Member
- Messages
- 7
- Location
- USA
I recieved a new Compaq Presario CQ57 notebook from my father-in-law who never used it. Unfortunately it had a bad hard drive right out of the box. Years had passed so no warranty. I replaced the HD with another of the same. The computer came with the disks so I thought this would be simple but alas as many things in my life things didn't go as planned. The disks supplied are the 2 disk version. The computer came with Windows 7 Home Premium installed. When starting the disks by rebooting the computer the top of the black screen says "starting Windows 98" and further down the same page it says "Error: unable to detect... ADAPI IDE CD-ROM device driver not loaded". Seems to load anyway and start up well with disk one but when it gets to the point that it asks if I have the 1 or 2 disk version I hit 2 and immediately it asks me to insert disk 2. Before doing so an error flashes up in the bottom left corner that says "no files found. Invalid drive specification". I obey and insert disk 2 but nothing happens except for flashing the same message. In a nutshell - no restore.*
I've searched the net for days trying to find and answer and came up with ideas but nothing specific. I have run all the Bios tests and all come out working well. Boot order is cd/dvd room first. I downloaded a copy of Windows 7 onto an external drive but I can't get the CQ57 to read it even after changing the boot order. Also downloaded the drivers for the CD-rom but can't load that either. I have an old copy of Windows 2000 that I tried just to see what it would do and it actually loaded it but it would never start up. Didn't expect it too but it at least showed the CD-rom was working. I've hit every F-keys a million times and can't come up with anything that works.*
I'm ready to throw this computer out the window (no pun intended) so any advice you can give would be greatly appreciated. I am not a computer wiz so if you have something I need to do that required C++ or higher or lower you'd better talk me through it.*
Thank you
I've searched the net for days trying to find and answer and came up with ideas but nothing specific. I have run all the Bios tests and all come out working well. Boot order is cd/dvd room first. I downloaded a copy of Windows 7 onto an external drive but I can't get the CQ57 to read it even after changing the boot order. Also downloaded the drivers for the CD-rom but can't load that either. I have an old copy of Windows 2000 that I tried just to see what it would do and it actually loaded it but it would never start up. Didn't expect it too but it at least showed the CD-rom was working. I've hit every F-keys a million times and can't come up with anything that works.*
I'm ready to throw this computer out the window (no pun intended) so any advice you can give would be greatly appreciated. I am not a computer wiz so if you have something I need to do that required C++ or higher or lower you'd better talk me through it.*
Thank you