OK, it didn't work... again... nothing at all. Here is how everything has happened. I got everything hooked up and ready to go. When I would turn the power on, the fans and LEDs flicked on for a second then shut off. I took it apart and tried a barebone start up, absolutely nothing. Then, I did the wire thing in the 20/24 connecter and it powered up right away and the fan i hooked it up to spun. I put everything back together, tied wires more carefully, no molex touching metal. I changed the plug to the vid card and put in a 6 pin to molex plug adapter thing. now nothing happens... again. any ideas? the PSU works, cuz the paper clip thing worked.