OP OP E Ephexx793 In Runtime Messages 147 Oct 23, 2007 #21 Ok, Be right back let me shut down.. don't leave =]
veg1992 Golden Master Messages 19,993 Oct 23, 2007 #22 i'll try and stay on... but i'm reading Illiad for hw..
OP OP E Ephexx793 In Runtime Messages 147 Oct 23, 2007 #23 Ok, all I got was "Combined Power On +3.3V and +5V Rails not exceed 150W. Combined Power On +12V and +12VB Rails not exceed 375W." =[ hope this helps somewhat, I jotted down the model # and am looking it up now on dell's site.
Ok, all I got was "Combined Power On +3.3V and +5V Rails not exceed 150W. Combined Power On +12V and +12VB Rails not exceed 375W." =[ hope this helps somewhat, I jotted down the model # and am looking it up now on dell's site.
veg1992 Golden Master Messages 19,993 Oct 23, 2007 #24 ^ lol ... wth... can u upload a pic or something? usually its based on amperage... so its like 45 or 35 or something... like that..
^ lol ... wth... can u upload a pic or something? usually its based on amperage... so its like 45 or 35 or something... like that..
OP OP E Ephexx793 In Runtime Messages 147 Oct 23, 2007 #25 Copy + Pasted from my Comp. manual (online) Power DC power supply: Wattage 375 W Heat dissipation 1280 BTU/hr NOTE: Heat dissipation is calculated based upon the power supply wattage rating. Voltage (see the safety instructions in the Product Information Guide for important voltage setting information) Manual switched power supply: 90 to 135 V and 180 to 265 V at 50/60 Hz Backup battery 3-V CR2032 lithium coin cell
Copy + Pasted from my Comp. manual (online) Power DC power supply: Wattage 375 W Heat dissipation 1280 BTU/hr NOTE: Heat dissipation is calculated based upon the power supply wattage rating. Voltage (see the safety instructions in the Product Information Guide for important voltage setting information) Manual switched power supply: 90 to 135 V and 180 to 265 V at 50/60 Hz Backup battery 3-V CR2032 lithium coin cell
veg1992 Golden Master Messages 19,993 Oct 23, 2007 #26 errrm... i'm not seeing what i'm looking for.... I'm lost..
OP OP E Ephexx793 In Runtime Messages 147 Oct 23, 2007 #27 Ok, can you tell me what yours is on your power supply? If I see something that looks similar, I can post it. So pls give me your rails, I believe that's what you asked for.
Ok, can you tell me what yours is on your power supply? If I see something that looks similar, I can post it. So pls give me your rails, I believe that's what you asked for.
veg1992 Golden Master Messages 19,993 Oct 23, 2007 #28 Mine says a lot of stuff like what you have... but mine also says... . +3.3V@10A, +5V@15A, +12V@10A, -5V@0.5A, +5VSB@3.0A
Mine says a lot of stuff like what you have... but mine also says... . +3.3V@10A, +5V@15A, +12V@10A, -5V@0.5A, +5VSB@3.0A
OP OP E Ephexx793 In Runtime Messages 147 Oct 23, 2007 #29 K, will look for that. posting back when I find.
veedubfreak Golden Master Messages 6,979 Oct 23, 2007 #30 This crappy little 350w that is in the machine i use for wiping drives actually has 21A on the 12v. Dell tends to use pretty low end stuff in their machines though.
This crappy little 350w that is in the machine i use for wiping drives actually has 21A on the 12v. Dell tends to use pretty low end stuff in their machines though.