dynamically_pro
Beta member
- Messages
- 2
Hello,
I am building a new system, and have had many strange thiing happen when I tried to load windows.
here is what happened in steps.
1. I only put the basic stuff in that I needed first, when I tried to load windows, I got many blue screens, saying check ram, or disbale the L2cache or disbale the shadowing opton in the bios.
2. I tried a different cpu, know to work, and I have tried 3 different new sticks of ram.
3. I finally disbaled the L2cache and got windows loaded, but the pc continues to reboot itself over and over again.
4. I looked at the ECS website, and got a stick of ram they say works for this mobo, but when I install it, the pc just keeps beeping.
5. I am thinking that this new mobo is bad. What does anyone think about this please?
system specs:
755-A2 mobo socket 754
AMD 3100+ cpu
1 gig of ram
120 G hard drive
asus Nvidia TI 4800 SE video card 128 mb
---------------------------------------
well I took mobo out, and laid in box, everything seems to be ok, has not rebooted. I did notice that whenI got ready to take mobo out, it was missing 2 or 3 screws on the mobo to hold it in.
Not sure that this is the problem. I also am wonding if the ata raid card I installed to hook up 2 other drives could be the problem.
I checked temp, of system in the case and outside the case, all seem ok.
really wonding if the grounding is the problem. Should I hook up everything, I want to run in the pc, and leave mobo in box, and see what the results are?
I also did set bios at deflaults, and shorted the jumpers