I have an Asus p4s8x-x motherboard and just upgraded from a celeron 2.8 to a p4 3.06 533 fsb. The new processor is the absolute max that the board is supposed to be able to handle without overclocking. But after installing it I had not been able to get the Bios to recognize the full speed of the cpu. It would only see 1.6 ghz not 3.06. I have tried doing a repair reinstall and I have flashed the BIOS. Someone suggested that I may have been dupped, when I look under mycomputer/properties It says the processor is 3.06 and under device manager it also says that the cpu is a 3.06. So what do I need to do to get the board to recogize the full speed of the processor? It is also supposed to add the option of enable/disable hyperthreading once the new processor is installed, but it has not shown up in the Bios. Is it possible that I really did get jipped or do I need to do something to the Bios in order use the full power of this CPU?