Abstract Hero
Hyper Techie
- Messages
- 1,843
- Location
- Phoenix, AZ
So after long fighting myself I've decided to create hideaway holes.
Before
Deconstruction
Cut the whole out using a rotary tool with a reinforced cutting wheel.
I put rubber uchannel around the edges to prevent it from cutting the wires (its an ugly job but you can see it when its put together.)
To get the wires to where I wanted them I had to cut into the HD cage.
After the cut i ground it down and put uchannel on there aswell.
Much cleaner but I hate the ****ing ribbon. Either I'm going to take out that drive or replace it.
Before
Deconstruction
Cut the whole out using a rotary tool with a reinforced cutting wheel.
I put rubber uchannel around the edges to prevent it from cutting the wires (its an ugly job but you can see it when its put together.)
To get the wires to where I wanted them I had to cut into the HD cage.
After the cut i ground it down and put uchannel on there aswell.
Much cleaner but I hate the ****ing ribbon. Either I'm going to take out that drive or replace it.