Kinshou Ookawa
Solid State Member
- Messages
- 10
hello,
i'm intending on building an extremely powerful gamer / server pc and i
wanted to get some info as to how much power i will need to feed this
beast.
the parts are as follows:
Ebuyer Achilles Ach-bl Case-body Blue Atx Case No PSU
Zalman CNPS7700-CU 120mm Super Flower Cooler AMD and P4
LG GSA4160 DL 16x DVD R/RW/RAM IDE Burner - OEM Beige
Sapphire ATI Radeon X800 XT Platinum Edition 256MB DDR3 AGP8X Graphic Card with DVI / TV-Out & VIVO
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
DABS Value 17" TFT Slim 1280x1024 TCO99 (actually an LG tft)
MSI K8N NEO2 Platinum-54G Mainboard S939 nForce3 250Ultra,SATA,GbLAN,ATX,Dual-DDR
AMD Athlon 64 FX-55 / 1MB / 2600Mhz / Socket 939 / Processor
Akasa Paxpower Ultra Quiet 460w ATX2.0 PSU (blue LED)
Kingston HyperX 1GB (2x 512) 400MHz DDR Non-ECC CL2 (2-3-2-6-1) DIMM
Kingston HyperX 1GB (2x512) 400MHz DDR Non-ECC CL2 (2-3-2-6-1) DIMM
yup, that is a 1TB hdd (raid-0 when i buy n' build it) and 2 gigs of ram
(and its BLUE ), all in a big blue case.
i've also heard some rumours that windows xp only supports a 256kb
on chip cache (but no worries there - i'm linux all the way, good old slackware ), and that the fx series don't handle DirectX9 well, and just
to check, is the amd fx-55 chip compatible with non registered ram, and
the biggest factor of all - is there REALLY enough power to supply all
the components?
i'm intending on building an extremely powerful gamer / server pc and i
wanted to get some info as to how much power i will need to feed this
beast.
the parts are as follows:
Ebuyer Achilles Ach-bl Case-body Blue Atx Case No PSU
Zalman CNPS7700-CU 120mm Super Flower Cooler AMD and P4
LG GSA4160 DL 16x DVD R/RW/RAM IDE Burner - OEM Beige
Sapphire ATI Radeon X800 XT Platinum Edition 256MB DDR3 AGP8X Graphic Card with DVI / TV-Out & VIVO
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
Maxtor 7Y250M0 250GB Serial ATA 7200RPM 8MB
DABS Value 17" TFT Slim 1280x1024 TCO99 (actually an LG tft)
MSI K8N NEO2 Platinum-54G Mainboard S939 nForce3 250Ultra,SATA,GbLAN,ATX,Dual-DDR
AMD Athlon 64 FX-55 / 1MB / 2600Mhz / Socket 939 / Processor
Akasa Paxpower Ultra Quiet 460w ATX2.0 PSU (blue LED)
Kingston HyperX 1GB (2x 512) 400MHz DDR Non-ECC CL2 (2-3-2-6-1) DIMM
Kingston HyperX 1GB (2x512) 400MHz DDR Non-ECC CL2 (2-3-2-6-1) DIMM
yup, that is a 1TB hdd (raid-0 when i buy n' build it) and 2 gigs of ram
(and its BLUE ), all in a big blue case.
i've also heard some rumours that windows xp only supports a 256kb
on chip cache (but no worries there - i'm linux all the way, good old slackware ), and that the fx series don't handle DirectX9 well, and just
to check, is the amd fx-55 chip compatible with non registered ram, and
the biggest factor of all - is there REALLY enough power to supply all
the components?