Im new to OCing so this is prolly noobish as heck. When i OC my 5400 to 3O80MHz it runs stable, but if i try for 3194MHz it will crash my system and do a memory dump. All im doing is changing the cpu FSB from 200-220. When i go to FSB 222 i start getting issues. Am i not doing something else i should be doing? Id like to get this up to 3.2Ghz or higher if i can and run it stable!
AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ (2 CPUs), ~2.8GHz, AC 64 pro HSF
CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel 5.5.5.18
Windows Vistaâ„¢ Home Basic 64bit (6.0, Build 6001) Service Pack 1 (6001.longhorn_rtm.080118-1840)
MSI K9A2 CF-F AMD 790X CrossFire Chipset DDR2/1066 Dual 16X PCIE SATA RAID MB w/GbLAN,USB2.0,&7.1Audio
My Vcore is at 1.360..if thats the issue how do i change it. All the volt setting in Cell menu are on auto and i cant seem to change that
Assuming by the lack of replies, this system cant be Overclocked, Ill just make the upgrades. Thanx anyway!
AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ (2 CPUs), ~2.8GHz, AC 64 pro HSF
CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel 5.5.5.18
Windows Vistaâ„¢ Home Basic 64bit (6.0, Build 6001) Service Pack 1 (6001.longhorn_rtm.080118-1840)
MSI K9A2 CF-F AMD 790X CrossFire Chipset DDR2/1066 Dual 16X PCIE SATA RAID MB w/GbLAN,USB2.0,&7.1Audio
My Vcore is at 1.360..if thats the issue how do i change it. All the volt setting in Cell menu are on auto and i cant seem to change that
Assuming by the lack of replies, this system cant be Overclocked, Ill just make the upgrades. Thanx anyway!