Win2kpatcher
Fully Optimized
- Messages
- 2,171
Question for you all? I recently built me a pretty nice new system..and the dumbass I was didnt clip the heat sink down correctly...so I finally installed MBM to measure the temp and it was at 75 degrees C at idle and 85-90 when taxing the system!!!
So I then redid the heat sink at now idle at 49-50 and at full load 60-65. Are these temps normal or still kind of high? What do you have and what are you running at? I have the OEM pentium4 heatsink and 3 case fans...
system specs are
Intel Pentium4 3.0GHZ
512MB DDR RAM
ATI Radeon 9800 PRO 128MB
WD IDE 7200RPM 160GB HD
Am I ok? now?
So I then redid the heat sink at now idle at 49-50 and at full load 60-65. Are these temps normal or still kind of high? What do you have and what are you running at? I have the OEM pentium4 heatsink and 3 case fans...
system specs are
Intel Pentium4 3.0GHZ
512MB DDR RAM
ATI Radeon 9800 PRO 128MB
WD IDE 7200RPM 160GB HD
Am I ok? now?