Upgrade problem

[BillBrad]

I recently upgraded my motherboard to an Intel D875PBZ with a 2.8gig pentium 4. Also upgraded the power supply to support the board and I am using 512megs of ddr3200 400mhz ram. My video card is a diamond viper II v220 32 mb with the savage2000 chip set. Whenever I boot up windows xp pro it hangs on the driver file AGP440.sys. I went into the recovery mode and disabled the driver and then it would hang on MUP.SYS. I kept disabling them all until I got to Fastfat.sys. Once i disabled this file it said it needed this file and would just restart. The Computer will not start in either normal mode or all of the different Safe modes. Also it will not start in VGA mode either. I tried to edit the boot.ini and that didn't work out. Played around with the BIOS with features like ACPI, plug and play, etc.. Made sure it was an updated bios version also. I have read a ton of posts online about this problem and still cannot solve it. I also tried reinstalling win xp pro over itself and that didn't work. All of my hardware is seated on the motherboard correctly. I am thinking since i have a pretty old video card that I should get a new one and try it out..?? Not sure if this will fix it since if you take the video card out and start it up, windows still restarts itself at the same driver file. Any help would be greatly appreciated. Thanks

 

[Lostman]

Please don't double post. Refer back to your post in the Hardware forum.