bkolk
In Runtime
- Messages
- 458
- Location
- Massachusetts
Ok so i want to do a mild overclock but i really want to know what im doing before i go for it.
CPU: AMD 3700+ san diego (2.2ghz 200x11)
In CPU-Z my CPU said "CPU clock ratio" was x9, shouldn't that be x11?
In CPU-z it says my DIMM voltage is 2.5V (under the SPD tab), in the BIOS it says DIMM is 2.7
Also, there is a setting for AGP overclock in mhz, initially set at 66mhz, i shouldnt touch this correct?
And whats CPU ratio control?
When increasing my FSB and running tests, unstable would have random crashes and i could restart, load bios and lower FSB right?
Would there be a scenario just by increasing FSB that the system wouldnt boot, or me able to get into the bios to lower the settings?
CPU: AMD 3700+ san diego (2.2ghz 200x11)
In CPU-Z my CPU said "CPU clock ratio" was x9, shouldn't that be x11?
In CPU-z it says my DIMM voltage is 2.5V (under the SPD tab), in the BIOS it says DIMM is 2.7
Also, there is a setting for AGP overclock in mhz, initially set at 66mhz, i shouldnt touch this correct?
And whats CPU ratio control?
When increasing my FSB and running tests, unstable would have random crashes and i could restart, load bios and lower FSB right?
Would there be a scenario just by increasing FSB that the system wouldnt boot, or me able to get into the bios to lower the settings?