colin
In Runtime
- Messages
- 206
First time oc ing
Had to reset bios a few times because of blank screen
but figured it out thanks to all the info on this board.
Gonna let it run for a week or two before I try anything else.
I ran Prim95 three times for 3 hours without any problems
2520.08 mhz
280.1 x 9.0
cpu vcore 1.60v
cpu idle temp 29 c
memory ddr-400 (233 mhz)
chip set 1.5v
+3.3v - 3.3v
+5v - 5v
Vdimm 1.7v
Vbat 3.0v
5VSB 5v
MB- EPoX EP-9NPA+ SLi Socket 939 NVIDIA nForce4 SLI ATX
MEM- Kingston HyperX 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR
400 (PC 3200)
Leadtek PX7600 GT Geforce 7600GT 256MB GDDR3 PCI Express
Had to reset bios a few times because of blank screen
but figured it out thanks to all the info on this board.
Gonna let it run for a week or two before I try anything else.
I ran Prim95 three times for 3 hours without any problems
2520.08 mhz
280.1 x 9.0
cpu vcore 1.60v
cpu idle temp 29 c
memory ddr-400 (233 mhz)
chip set 1.5v
+3.3v - 3.3v
+5v - 5v
Vdimm 1.7v
Vbat 3.0v
5VSB 5v
MB- EPoX EP-9NPA+ SLi Socket 939 NVIDIA nForce4 SLI ATX
MEM- Kingston HyperX 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR
400 (PC 3200)
Leadtek PX7600 GT Geforce 7600GT 256MB GDDR3 PCI Express