LiamWilliams1990
Solid State Member
- Messages
- 11
Whenever I turn on my computer a receive a "No Signal" error from my monitor. I've tried plugging it into my motherboard's VGA port, an 8600gt and an 8800gts but I get the same result every time.
I have also tried reseating the RAM and the two graphics cards, checked all cables and cleared the cmos (through jumper and battery).
I'm unsure whether it is the motherboard or the CPU, maybe even the ram is fried.
Does anyone have any tips or have any suggestions which component I should replace first?
Thanks alot if anyone can help,
Liam.
I have also tried reseating the RAM and the two graphics cards, checked all cables and cleared the cmos (through jumper and battery).
I'm unsure whether it is the motherboard or the CPU, maybe even the ram is fried.
Does anyone have any tips or have any suggestions which component I should replace first?
Thanks alot if anyone can help,
Liam.