xykoazshit
Solid State Member
- Messages
- 13
Hey guys, hope someone can help...
I've just ordered hundreds of dollars worth of components,
spent 3 hours assembling them, and well.. something failed
and I can't figure out what it is.
The specs:
BioStar TA770A2 Motherboard
AMD Phenom Black Edition 9850
Thermaltake CLpo39 Ruby Orb Cpu heatsink/fan
RAM 4GB: Supertalent Pc6400 DDR2 2 GB x 2
Graphics: Asus 512 MB DDR2 Pci-xpress card
Case coolermaster rc1000 (with 5 chassis fans!!)
Drives: Samsung 200 GB IDE
Samsung 160 GB SATA , HTDL DVDRW DL IDE
Optional cards: None
Basically I've put in just the basics, assembled everything.
Started it up...
Everything seemed ok... CPU temp reading is 40 degrees
Celcius..
When I boot XP Pro disc for install, it does the "Setup is
copying files" and half way thru it freezes and doesn't
respond to CTRLALTDEL..
When I try Vista Ultimate/Business boot disc for install, I
get past the initial menu, and then Blue screen of death..
Memory_Check_Exception and a bunch of codes I will look them
up and post later if necessary. And this blue screen error
is so far consistent tried it 4-5 times.
I tried to look these up but mostly say the same thing Could
me memory, could be heatsink, could be parity, ecc, or some
stuff but doesn't give me more human answers..
so I come to you in frustration..
I hope someone can help me troubleshoot this...
Thanks guys!!
Ryan
I've just ordered hundreds of dollars worth of components,
spent 3 hours assembling them, and well.. something failed
and I can't figure out what it is.
The specs:
BioStar TA770A2 Motherboard
AMD Phenom Black Edition 9850
Thermaltake CLpo39 Ruby Orb Cpu heatsink/fan
RAM 4GB: Supertalent Pc6400 DDR2 2 GB x 2
Graphics: Asus 512 MB DDR2 Pci-xpress card
Case coolermaster rc1000 (with 5 chassis fans!!)
Drives: Samsung 200 GB IDE
Samsung 160 GB SATA , HTDL DVDRW DL IDE
Optional cards: None
Basically I've put in just the basics, assembled everything.
Started it up...
Everything seemed ok... CPU temp reading is 40 degrees
Celcius..
When I boot XP Pro disc for install, it does the "Setup is
copying files" and half way thru it freezes and doesn't
respond to CTRLALTDEL..
When I try Vista Ultimate/Business boot disc for install, I
get past the initial menu, and then Blue screen of death..
Memory_Check_Exception and a bunch of codes I will look them
up and post later if necessary. And this blue screen error
is so far consistent tried it 4-5 times.
I tried to look these up but mostly say the same thing Could
me memory, could be heatsink, could be parity, ecc, or some
stuff but doesn't give me more human answers..
so I come to you in frustration..
I hope someone can help me troubleshoot this...
Thanks guys!!
Ryan