RhythmMgmnt
Baseband Member
- Messages
- 58
So I managed to squeeze the Scythe Ninja in there. Everything else done. Fired it up, it's not reading a couple things in the BIOS.
I've got 2 optical drives (DVD-R and DVD-RW), 1 floppy, and 2 HDs (1 37GB 10K RPM, 1 200GB 7200RPM)
BIOS Main screen:
Pri IDE Master: Not Detected
Pri IDE Slave: Not Detected
Third IDE Master: 37.0GB
Third IDE Slave: Not Detected
Fourth IDE Master: Not Detected
Fourth IDE Slave: Not Detected
OK now if I go into Pri IDE and select "Auto" it sees the DVD drive and appears that way when I return to main screen. However, no sign from DVD-RW drive (it's not a dead drive, it's got power cause the drive tray opens out), and no sign from the 200GB'er. The 37GB is SATA and 200GB is IDE.
Also, if I restart, it doesn't "save" the changes of how it recognized the DVD drive and goes back to how I have it written above as Not Detected.
Anyone have any suggestions? Almost there!!
RM
I've got 2 optical drives (DVD-R and DVD-RW), 1 floppy, and 2 HDs (1 37GB 10K RPM, 1 200GB 7200RPM)
BIOS Main screen:
Pri IDE Master: Not Detected
Pri IDE Slave: Not Detected
Third IDE Master: 37.0GB
Third IDE Slave: Not Detected
Fourth IDE Master: Not Detected
Fourth IDE Slave: Not Detected
OK now if I go into Pri IDE and select "Auto" it sees the DVD drive and appears that way when I return to main screen. However, no sign from DVD-RW drive (it's not a dead drive, it's got power cause the drive tray opens out), and no sign from the 200GB'er. The 37GB is SATA and 200GB is IDE.
Also, if I restart, it doesn't "save" the changes of how it recognized the DVD drive and goes back to how I have it written above as Not Detected.
Anyone have any suggestions? Almost there!!
RM