andrewsvalesen
Daemon Poster
- Messages
- 678
Ok I have this powersupply..
Newegg.com - Broadway Com Corp Okia-black-650 ATX 650W Power Supply 115/230 V cUL , UL , CSA - Retail
im starting to think its not very good.
When I plugged in all of my usbs, it loaded windows and right at the login screen (that it didn't show) it just sat there... and restarted.
I've been told that it could be my powersupply
here are my specs
Newegg.com - Broadway Com Corp Okia-black-650 ATX 650W Power Supply 115/230 V cUL , UL , CSA - Retail
7950gx2 @ 600mhz/1500mhz
X2 3600+ @ 3.0ghz
Tforce550 mobo
A bunch of fans and usbs
do I need a new powersupply?
It's giving me a few errors in event viewer, specifically these:
The driver nv4_disp for the display device \Device\Video1 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates.
DCOM got error "This service cannot be started in Safe Mode " attempting to start the service EventSystem with arguments "" in order to run the server:
{1BE1F766-5536-11D1-B726-00C04FB926AF}
The following boot-start or system-start driver(s) failed to load:
ATITool
BIOS
BS_I2cIo
Fips
kl1
klif
Processor
SCDEmu
if you think its my psu, what psu would you recommend that would be much better? (im hoping with modular cables.)
the most i can spend is 120$ ( i only have 139 in the bank ^.^)
oh and it works in safe mode.
Newegg.com - Broadway Com Corp Okia-black-650 ATX 650W Power Supply 115/230 V cUL , UL , CSA - Retail
im starting to think its not very good.
When I plugged in all of my usbs, it loaded windows and right at the login screen (that it didn't show) it just sat there... and restarted.
I've been told that it could be my powersupply
here are my specs
Newegg.com - Broadway Com Corp Okia-black-650 ATX 650W Power Supply 115/230 V cUL , UL , CSA - Retail
7950gx2 @ 600mhz/1500mhz
X2 3600+ @ 3.0ghz
Tforce550 mobo
A bunch of fans and usbs
do I need a new powersupply?
It's giving me a few errors in event viewer, specifically these:
The driver nv4_disp for the display device \Device\Video1 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates.
DCOM got error "This service cannot be started in Safe Mode " attempting to start the service EventSystem with arguments "" in order to run the server:
{1BE1F766-5536-11D1-B726-00C04FB926AF}
The following boot-start or system-start driver(s) failed to load:
ATITool
BIOS
BS_I2cIo
Fips
kl1
klif
Processor
SCDEmu
if you think its my psu, what psu would you recommend that would be much better? (im hoping with modular cables.)
the most i can spend is 120$ ( i only have 139 in the bank ^.^)
oh and it works in safe mode.