I have just built a new computer with the Intel 660 P4. My problem has something to do with the mobo or processor. I am just looking for some general Ideas on why the system would restart during the POST. Here is the scenario: I have disconnected all drives, HDD/CD/DVD/etc, and all nonessentials. I am just trying to get to the bios. The reset button is not connected and I have manually started the system with a screwdriver. I have uninstalled the board and placed it on some cardboard to check for grounding issues, not it. The ram & video card have been tested on another system and work. Everything is compatible so says the manufacturer. So, in a case that everything was done correctly and is compatible, what would you think could cause this?
The POST displays as follows: (brief description; If the processor was bad do you think it would read it?)
Intel P4 xxxxxxx [ENABLED]
Ram 4xxxxxxxxxxxx OK
Restarts hereÂ…over and overÂ…
Thanks Guys!
The POST displays as follows: (brief description; If the processor was bad do you think it would read it?)
Intel P4 xxxxxxx [ENABLED]
Ram 4xxxxxxxxxxxx OK
Restarts hereÂ…over and overÂ…
Thanks Guys!