OP OP N NOGA Daemon Poster Messages 750 Feb 18, 2006 #61 dont know how to do that, what would that be under in my BIOS? what would it look like ok so i set the cpu back to 3.14GHz then
dont know how to do that, what would that be under in my BIOS? what would it look like ok so i set the cpu back to 3.14GHz then
reggie_da_man Fully Optimized Messages 2,679 Feb 18, 2006 #62 Yes, this is all done in the bios. Try and find a setting for your ram and change it to 66MHz.
OP OP N NOGA Daemon Poster Messages 750 Feb 18, 2006 #63 theres this thing that says memory frequency for choices : auto DDR266 DDR333 is that it?
reggie_da_man Fully Optimized Messages 2,679 Feb 18, 2006 #64 Yes it is, is there a manual setting anywhere? If not set it to DDR 266.
OP OP N NOGA Daemon Poster Messages 750 Feb 18, 2006 #65 theres no manual so i will just us DDR266 (srry i took so long, i feel asleep, not a very good thing to do when one is overclocking! lol) ok now what? NOTE: i checked it boots
theres no manual so i will just us DDR266 (srry i took so long, i feel asleep, not a very good thing to do when one is overclocking! lol) ok now what? NOTE: i checked it boots
reggie_da_man Fully Optimized Messages 2,679 Feb 18, 2006 #66 Now use the same configurations you did when you got it up to 3.14GHz (fsb @ 157 and the same voltage) and start raising the fsb slowly until you find the max your CPU can go to.
Now use the same configurations you did when you got it up to 3.14GHz (fsb @ 157 and the same voltage) and start raising the fsb slowly until you find the max your CPU can go to.
OP OP N NOGA Daemon Poster Messages 750 Feb 20, 2006 #69 ok well, i got up to 3.188GHzish till it errored at 10 hours then went eratic (the test before i got 12 1/2 hours)
ok well, i got up to 3.188GHzish till it errored at 10 hours then went eratic (the test before i got 12 1/2 hours)