brucebolt83
Beta member
- Messages
- 4
I was so worried going into my first real build that either one of the components I bought would be bad or I would mess something up. I hope neither of those things is true but I'm having trouble.
I put everything together and when it starts, power is on and all fans run but I get absolutely no beeps or video. The power LED is orange.
I disconnected/removed pretty much everything including the video card and RAM to the point that the only things connected were the PSU, MB, and CPU. Still had the same result.
As far as I know everything is connect properly. I'm just kind of lost and don't know where to troubleshoot from here. I really hope nothing is messed up. Any advice on something I might be overlooking or anything I could try would be appreciated.
Gigabyte GA-965P-DS3
C2D E6300
Antec SmartPower 2.0 500
I put everything together and when it starts, power is on and all fans run but I get absolutely no beeps or video. The power LED is orange.
I disconnected/removed pretty much everything including the video card and RAM to the point that the only things connected were the PSU, MB, and CPU. Still had the same result.
As far as I know everything is connect properly. I'm just kind of lost and don't know where to troubleshoot from here. I really hope nothing is messed up. Any advice on something I might be overlooking or anything I could try would be appreciated.
Gigabyte GA-965P-DS3
C2D E6300
Antec SmartPower 2.0 500