Druid
Fully Optimized
- Messages
- 3,065
edit: Title should say card not cable
Today, I noticed that my dvd drive wasn't working properly when I tried to install some software. It isn't being detected by windows. I've had issues with it before, but a restart would always resolve it.
In the device manager, it says this:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I tried reconnecting it to the computer, and it still didn't work. At this point, I noticed that windows wasn't seeing my W-LAN PCI card in "change adapter settings" from the "Network and sharing center." The device manager listed it as working properly, however.
I tried re-seating the card but no dice.
I then tried toggling the plug and play setting in the BIOS on and off, and neither worked.
I don't know what to do here. Any help with either issue would be much appreciated.
Thank you
Today, I noticed that my dvd drive wasn't working properly when I tried to install some software. It isn't being detected by windows. I've had issues with it before, but a restart would always resolve it.
In the device manager, it says this:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
I tried reconnecting it to the computer, and it still didn't work. At this point, I noticed that windows wasn't seeing my W-LAN PCI card in "change adapter settings" from the "Network and sharing center." The device manager listed it as working properly, however.
I tried re-seating the card but no dice.
I then tried toggling the plug and play setting in the BIOS on and off, and neither worked.
I don't know what to do here. Any help with either issue would be much appreciated.
Thank you