STOP 0x0000000A errors indicate a driver or firmware problem normally as you probably know.
If it helps (which it probably won't) :
the 1st parameter (0x00000004) is the memory address that was referenced when the problem occured,
2nd parameter determines the IRQL that was accessing the memory.
The 3rd parameter indicates a write (as opposed to a read) error.
The last parameter is address of the instruction that attempted to access the memory specified in param 1.
If last param is within a address range used by a particular device, you can determine which device is causing the problem.
If it helps (which it probably won't) :
the 1st parameter (0x00000004) is the memory address that was referenced when the problem occured,
2nd parameter determines the IRQL that was accessing the memory.
The 3rd parameter indicates a write (as opposed to a read) error.
The last parameter is address of the instruction that attempted to access the memory specified in param 1.
If last param is within a address range used by a particular device, you can determine which device is causing the problem.