S Sp4rtan In Runtime Messages 171 Dec 18, 2005 #1 I want to overclock my 4400 x2 but I not sure what a safe FSB freqency is. I am also using the Zalman CNPS 9500
I want to overclock my 4400 x2 but I not sure what a safe FSB freqency is. I am also using the Zalman CNPS 9500
G gaara Fully Optimized Messages 3,789 Location Canada Dec 18, 2005 #2 You and only you can decide the answer to this question
Osiris Golden Master Messages 36,817 Location Kentucky Dec 18, 2005 #3 raise in increments of 5, when it becomes unstable, go back a few.
C0RR0SIVE Golden Master Messages 9,213 Location Lexington, KY Dec 18, 2005 #5 If that don't work try making sure your not using Value Ram, and set the divider to a lower level, if that don't work lower your FSB down by 2-3 and test....
If that don't work try making sure your not using Value Ram, and set the divider to a lower level, if that don't work lower your FSB down by 2-3 and test....
HAVOC Fully Optimized Messages 4,217 Location Milford, Connecticut Dec 20, 2005 #6 If all less fails, buy an Intel Pentium D! That was a joke.