Nitestick
Golden Master
- Messages
- 8,478
- Location
- Ñмерти Ð´Ð»Ñ Ñпаме
Not to steal the thread but is it save to put the ram to 3.0 or 3.1?
depends on the chips used on the ram. personally i wouldn't want to run 3.0v+ through anything other than BH-5/CH-5 chips. most memory doesn't like a lot of voltage but those suckers can take up to 4.0v provided they are cooled adequately. my ram runs DDR500@2-2-2-5@~3.4-3.5v