zildjianchris
In Runtime
- Messages
- 157
Today I began to overclock the new rig equipped with the E8500. I've read a fair bit, and my results don't seem to go along with the going trend. Is it normal to hit 4000Mhz with your cpu voltage set at 1.225?
Currently im running
9.5 x 421Mhz FSB
Ram is at 528Mhz
I know the fsb and ram isn't at 1:1, I have my own reasons for not doing so. Everything else is pretty much set to auto. But right now im running prime stress tests, speedfan and real temp. Under load I'd be lucky to hit the 50 degree mark. What are your thoughts on this?
EDIT: my voltage readings in cpu-z and speedfan are 1.208 & 1.21 respectively.
Currently im running
9.5 x 421Mhz FSB
Ram is at 528Mhz
I know the fsb and ram isn't at 1:1, I have my own reasons for not doing so. Everything else is pretty much set to auto. But right now im running prime stress tests, speedfan and real temp. Under load I'd be lucky to hit the 50 degree mark. What are your thoughts on this?
EDIT: my voltage readings in cpu-z and speedfan are 1.208 & 1.21 respectively.