Invalid Boot INI. File

[shenvoid01]

Hello all, I just built this computer, I just got it to detect the sata drives but now the Windows XP Pro I installed gives me the invalid boot. INI File message. I tried using the recovery console but I get the same result. I used the Bootcfg tool but it still. Any other possible solutions?

 

[Osiris]

1.Configure the computer to start from the CD-ROM or DVD-ROM drive. For information about how to do this, see your computer documentation, or contact your computer manufacturer.2.Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then restart your computer.3.When you receive the "Press any key to boot from CD" message, press a key to start your computer from the Windows XP CD-ROM.4.When you receive the "Welcome to Setup" message, press R to start the Recovery Console.5.If you have a dual-boot or multiple-boot computer, select the installation that you have to use from the Recovery Console. 6.When you are prompted, type the administrator password, and then press ENTER.7.At the command prompt, type bootcfg /list, and then press ENTER. The entries in your current Boot.ini file appear on the screen. 8.At the command prompt, type bootcfg /rebuild, and then press ENTER. This command scans the hard disks of the computer for Windows XP, Microsoft Windows 2000, or Microsoft Windows NT installations, and then displays the results. Follow the instructions that appear on the screen to add the Windows installations to the Boot.ini file. For example, follow these steps to add a Windows XP installation to the Boot.ini file: a. When you receive a message that is similar to the following message, press Y: Total Identified Windows Installs: 1

[1] C:\Windows
Add installation to boot list? (Yes/No/All)
b. You receive a message that is similar to the following message: Enter Load Identifier
This is the name of the operating system. When you receive this message, type the name of your operating system, and then press ENTER. This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.c. You receive a message that is similar to the following: Enter OS Load options
When you receive this message, type /fastdetect, and then press ENTER.

Note The instructions that appear on your screen may be different, depending on the configuration of your computer.9.Type exit, and then press ENTER to quit Recovery Console. Your computer restarts, and the updated boot list appears when you receive the "Please select the operating system to start" message.

 

[shenvoid01]

Does it matter if the Bios is set on os install mode?

here is what happened: After typing EXIT it reboots and restarts the installation process b/c the boot sequence is still set for cd drive. But before that happens I reset it to boot from and turn off the OS install mode and the HD and starts giving me the same message. This is a dell mother board model A02 for dimension 4600. I never saw the up dated boot list was i supposed to re-enter the recovery console?