how to set network path?

[linux1880]

In my home network of windows 2000 pros. I can see other 2 computer in My Network places but when I try to get in them a error says

\\XXXX is not accessible
The network path was not found.

How can I set the network path?

 

[HoLoCroN]

You have to make sure that resource is shared on the computer.

Also, when you are using the UNC (Universal Naming Convention or Uniform Naming Convention) make sure there aren't any typos.

 

[bla!!]

And also make sure that at least one drive/folder is shared

 

[linux1880]

I did The things are same

1. I shared the folders in each computer

2. I can ping each other

3. Names given to each computer are as simple as mike, raju ....

4. I have the firewall but the internal network is in the trusted zone, I tried it having firewall shutdown....no changes

Recently i see that out of 3 computer(comp, 1,2,3) computer 1 can see all in MY NETWORK PLACES

 

[linux1880]

I did The things are same

1. I shared the folders in each computer

2. I can ping each other

3. Names given to each computer are as simple as mike, raju ....

4. I have the firewall but the internal network is in the trusted zone, I tried it having firewall shutdown....no changes

Recently i see that out of 3 computer(comp, 1,2,3) computer 1 can see all in MY NETWORK PLACES but comp2 and 3 can see only themselves,

Can anyone help me in this matter?

 

[linux1880]

sorry for the messy post, you can have a look the one just above this post

 

[HoLoCroN]

You know you can delete that post yourself right?

Anyway,

Make sure file sharing is enabled on the NIC (TCP/IP properties.)

 

[linux1880]

I had it beforehand, i forgot to mention that.

 

[strange]

are you connecting through a router or hub. if so reset said unit. then it will assign its own pathing info.

 

[office politics]

are all comps in the same workgroup? do you have usernames/passwords setup on all pcs?

http://support.microsoft.com/defaul...port/kb/articles/Q258/7/17.ASP&NoWebContent=1