Ok i was helping my friend overclock his computer. he has an ECS K7S5A with a Athlon XP 1600+ to it. Now if you know any thing about this board you knew that u would have to update the bios in order to adjust the bus speed. well stock the computer had the bus set at 133MHz and the smallest increment you could increase it to was 166Mhz. so i set the bus to 166Mhz and rebooted and the computer did nothing what so ever. So i figured all i would have to do is to flash the bios...right? well after flashing i was still gettin the same problem. so i am now leaving the CMOS battery out for about 24 hours hoping that this will correct the problem. but does any one else have any other suggestions. i just hope not the cpu is fried.