daveppeters said:Another thing to check - you said that it works fine without the 80gig hard drive -- have you checked the jumper settings on both drives? The main drive should be set as master and the other should be set as slave. Also, I see that you have the 20gig 5400rpm drive as your main drive, the 80gig 7200rpm drive will give you better performance - you might want to put that as your main drive - it will make a bit of difference. Before you do that, go to Maxtor's website and download the powermax utility (http://www.maxtor.com/en/support/downloads/powermax.htm) - this will let you test the drive to make sure it doesn't have any problems. Good luck!
I'd surely love to do this, but I don't have a floppy drive . I have one, but its somewhere laying around in the dust. I use CDs only, if something requires a floppy installation I download it off the internet.
However, I will check my jumper settings.
Thanks for the extra help!
I'm going to format tonight, and install things back in 1 by 1.
Thanks again :beard: