I recently built a computer with the following components:
Chaintech 9CJS Zenith mobo
Kingston PC3200 HyperX memory
P4 2.8GHz (Prescott core)
ATI Radeon 9800 Pro 256mb
When I first wired up the system I seemed to have some initial problems with programs erroring out upon install. The errors received seemed to point to memory problems, so I downloaded some memory testers and found some errors. Figured contacting Kingston and getting some new RAM fresh from the factory wouldnt hurt. Installed the RAM and problems persisted so ran some memory test on it once again and it appears to be erroring more frequently than before. Frequency is set at the spec 400Mhz, Im not trying to build an overclocked system just want a stable one But any help would be appreciated thanks.
Chaintech 9CJS Zenith mobo
Kingston PC3200 HyperX memory
P4 2.8GHz (Prescott core)
ATI Radeon 9800 Pro 256mb
When I first wired up the system I seemed to have some initial problems with programs erroring out upon install. The errors received seemed to point to memory problems, so I downloaded some memory testers and found some errors. Figured contacting Kingston and getting some new RAM fresh from the factory wouldnt hurt. Installed the RAM and problems persisted so ran some memory test on it once again and it appears to be erroring more frequently than before. Frequency is set at the spec 400Mhz, Im not trying to build an overclocked system just want a stable one But any help would be appreciated thanks.