I went to EVGA.com and they've changed their download page. They use to have all of their older bios updates available but I don't see them anymore. Your bios is dated 5/22/2009 and the one I'm using is dated 3/30/2010 (I think that's what it said, I forgot to actually write that down.) I have the bios update I'm using saved to my harddrive, it's a .iso file you can burn to a cd. I'm suppose to tell you that you should try overclocking it without flashing the bios 1st, flashing can kill your mobo, but the bios I'm using is the last one tuned just for the original 4-core i7's before the 6-core 980 was released. EVGA does have a new bios available thats only a few months old, but I'm not going to try it. If you PM me your email I'll send you the .iso file.
Here are the settings I'm using for 4 GHz with my office pc. I did change the memory settings to match your memory.
Mother Board ( EVGA X58 SLI LE E-757 )
Drivers ( )
Bios ( E757_49 )
CPU ( i7 920 D0 )
CPU Cooler ( )
Memory ( )
PSU ( )
GPU ( )
Drivers ( )
Operating System ( )
Frequency Control
CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 201 ) - My board runs at 199.6 when set at 200 so I bumped it to 201
MCH Strap ( Auto )
CPU Uncore Frequency ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
OC Recovery ( Enabled )
Turbo Performance ( Disabled )
Memory Feature
Memory SPD ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067Mhz / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( 88 ) - you might be able to lower this to around 71
Command Rate ( 2T ) - you might be able to run 1T
Voltage Control
EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.31250 V ) - Raise this for ***STOP: 0x00000101, I would keep it below 1.4V, watch temps
CPU VTT Voltage ( +200mV ) - Raise this for ***STOP: 0x00000124, keep below +400mV, watch temps
CPU PLL VCore ( 1.725 )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( +0mV )
QPI PLL VCore ( 1.3 V )
IOH VCore ( 1.375 V )
IOH/ICH I/O Voltage ( 1.625 V )
ICH VCore ( 1.3 V )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )