Well when I was checking for bent pins there weren't any, but the moment I inserted the CPU the CPU's base snagged a little piece of the black plastic of the socket and it got jammed in between bending pins out of the way... I was disassembling the stuff for RMA and noticed that little plastic...
I then used a magnifying glass and tweezers and got them back in to place
I should have taken some photos of the bent pins with the plastic piece jammed there... well everything is fine now...
except the DLED displaying CPU Ini. permanently... it was the same with the bent pins tho...
I then used a magnifying glass and tweezers and got them back in to place
I should have taken some photos of the bent pins with the plastic piece jammed there... well everything is fine now...
except the DLED displaying CPU Ini. permanently... it was the same with the bent pins tho...