Morissette23
Solid State Member
- Messages
- 20
ok so ive been able to set all 3 channels of memory
Make the following changes to all 3 Channels (A, B and C)
Set the CAS Latency Time to 8
Set the tRCD to 8
Set the tRP to 8
Set the tRAS to 24
Set the Command Rate(CMD) to 1
like so but im unable to set
Okay the DRAM Voltage needs to be at 1.65 volts
Set the CPU/VTT to 1.2v
or 1.25v if you have any stability issues.
Make the following changes to all 3 Channels (A, B and C)
Set the CAS Latency Time to 8
Set the tRCD to 8
Set the tRP to 8
Set the tRAS to 24
Set the Command Rate(CMD) to 1
like so but im unable to set
Okay the DRAM Voltage needs to be at 1.65 volts
Set the CPU/VTT to 1.2v
or 1.25v if you have any stability issues.