NightSurge
Fully Optimized
- Messages
- 2,217
- Location
- Fort Wayne, IN
I have a new system I have built. The specs are in the signature. Right now I am not sure how to adjust the voltages manually without messing things up. I had it up to either 3.2 or 3.4 once on manual FSB but auto everything else and it blue screened after about an hour of use. Since then I backed it down to 3.1 and it has been fine and dandy.
I know with this build and my Xigmatek 120mm hs/f that I can get higher than 3.1GHz. I tried entering manual voltages at one point but there are so many things on there that I could change. There were about 10 different things that I could manually set voltages for. I tried setting the fsb to 375, the vcore voltage to 1.33 and the ram voltage to 2.2v which it should be able to handle. I left everything else auto and at start up it BSOD'd right after it got to the loading screen for Vista. Any help on what I need to adjust and to what settings?
Anyone have any experience with this board and the Q6600?
EDIT: oh and my temps when running 70% cpu load are only hitting near 54 at max and usually about 45-50 average for that duration. At 50% cpu load the temps are 40-44C or less. Idle cpu temp is 30C average. (between 28-34C depending on which core)
I know with this build and my Xigmatek 120mm hs/f that I can get higher than 3.1GHz. I tried entering manual voltages at one point but there are so many things on there that I could change. There were about 10 different things that I could manually set voltages for. I tried setting the fsb to 375, the vcore voltage to 1.33 and the ram voltage to 2.2v which it should be able to handle. I left everything else auto and at start up it BSOD'd right after it got to the loading screen for Vista. Any help on what I need to adjust and to what settings?
Anyone have any experience with this board and the Q6600?
EDIT: oh and my temps when running 70% cpu load are only hitting near 54 at max and usually about 45-50 average for that duration. At 50% cpu load the temps are 40-44C or less. Idle cpu temp is 30C average. (between 28-34C depending on which core)