Whats going on with my LCD?

[Devils6258]

You shouldnt need to force the graphics card to get it in, so i reckon you have either damaged the card or slot, or you havent fitted it in properly.

I didnt force it into the slot. It was getting it in the right position to fit in the slot that was hard. I had to bend the metal part of the card because, it was poking into the side of my case stopping the card from sliding in all the way. It's hard to describe. The metal strip that the VGA thing is in. No part of the actual board was touched.

Cleaned it. Didn't have very much dust, but the monitor wasn't screwed in tight so that might have been the problem. So far so good. But only time will tell if it's better.