Venice 3000 enough?

Status
Not open for further replies.
Yes it is enough with the DFI-Lan party. Get some ram to run at 2-2-2-5 and use a divider to bump up your clockspeed.
 
id say just get 3000 and then oc with the dfi lanparty u can prolly oc the crap wit good cooling!!!
 
The 3000+ is enough and in many cases will overclock as well if not better than the 3200+, they're all the same chip just speedbinned for specifics, and will generally have about the same cap at around 3GHz depending on your other hardware.

Yes it is enough with the DFI-Lan party. Get some ram to run at 2-2-2-5 and use a divider to bump up your clockspeed.
If you're buying TCCD/C/5s with PCBs or BH-5 chips you shouldn't need a divider until about 260MHz or higher.
 
Better timings with a divider is better than looser timings with no divider isn't it?
 
Status
Not open for further replies.
Back
Top Bottom